M.2 Drive: 7 Easy Steps Installation in No Time

M2 Drive

One of the most trending and exciting technologies currently available in computer storage today is the M.2 drives. There is no need for large space on your unit because M.2 drive does not require any wiring for data and power. In fact, M.2 almost does not take up too much space in your system unit.

Aside from that, it also allows you to use NVMe drives. Great isn't it.

M.2 Drive Installation Guide

You now have the best way to improve your computer's performance. But before you do it, you should check out your computer first, before joining the bandwagon. Not all computers are compatible with this type of storage. So you should check your motherboard if it will support your upgrades.

And if you finish checking up and ready for upgrades. Let's now install your M.2 SSD

M.2 SSD installation is so easy. It is because it does not require any wiring. You'll just have to prepare the small Phillips head screwdriver and a small 5mm hex screwdriver. Take note that not all system units require these drivers.

Installing M.2 Drive

1. Find an open the M.2 Socket

Motherboards are not all the same, some may have up to 3 sockets, it depends on the type. You can check out your motherboard manual to find out where is the M.2 socket. Some sockets are hidden below the video card so you might as well check it out.

2. Keep an eye on your SSD screws

Your Velocity Micro order comes with a small bag of screws. These screws are used for mounting an M.2 drive. Keep an eye on these little things for it is very small and easy to lose.

If you are not familiar with how it looks like, you can consult your motherboard manual for the list of all parts and accessories that are included in the package. SSD screws are very important to secure that your M.2 SSD is in place. So make sure that you keep an eye on these little things.

3. Time to Connect your SSD

Some boards have a pre-installed hex screw and if your board doesn't have one you can install it now with a 5mm hex screwdriver. But make sure not to over-tighten it.

Usually, M.2 sockets have multiple spots for hex screw and it still depends on the length of your M.2 drive. Most M.2 has a label beside each hole that denotes its specified length and the most common length is 80mm.

4. Insert the M.2 Drive

Before you attach your drive, pay close attention to the notched cut-out on both sides. Line up the side with the gold contacts with the socket on the motherboard. Make sure that the gold contacts are aligned properly before you insert it.

5. Gently push the drive

After inserting, you will notice that the drive is sit up at a 45-degree angle and not fully lay flat in the socket. It is because the socket is spring loaded so that whenever you will remove the remove it will just pop up.

Now you can gently push the drive down while aligning the semi-circle cut-out together with the top of the hex screwdriver.

6. Secure your drive

After the insertion, you cannot secure your drive the small screw then you’re down installing your M.2 drive to your motherboard.

7. Driver Installation

That's it so simple but you are not yet done with the installation process. You still need to install the M.2 to your Windows. Windows installation process is at least the same if your M.2 is an NVMe. But if it is a non-NVMe, then you still have to do the other process.  In M.2 NVMe installation, you need to install all your drivers. The installation also requires you to grab an additional driver for Windows storage controller. If you will not do this, your NVMe SSD will only give you half of its rated speed performance. 

After doing the downloading and installation process you are done. You have just finished installing one of the most impactful computer upgrades; smooth and easy, right? Good luck on your upgrades and if you lose your small SSD screws, you can contact your favorite online computer parts provider for your M.2 SSD screws and M.2 SSD standoffs.

Similar Articles

Amp Extension Cord

Extension cords are the type of items you are bound to find in any home or workplace.

Tin-Plated Copper Wire & It’s advantages

For any wire compound, there are multiple methods of increasing electrical conductivity, and durability is one of them. Tin plating copper wire has been a common technology for decades. With a relatively simple manufacturing process, tin-plated copper wire provides several advantages over bare copper.

5 Things to Know About Portable Power Stations

After a hard and taxing week, we are ready for a laid-back and relaxing weekend. You've made it to the campsite, set up the tent, and are now getting ready to make supper for the family. The moment is just right for playing some music while camping.

Mono vs Stereo

If you are starting in the world of music production, there is a good possibility that you do not completely comprehend the distinction between mono and stereo. This is comprehensible given the length of time each has been used, although in distinct capacities

iphone 14

Bluetooth earbuds have almost entirely replaced wired earphones. It is due to the enhanced user experience. Thanks to wireless technology! Plus, the noise-cancellation feature, top-notch design, high sound quality, and trouble-free usability are worth every penny. 

vision-inspection-systems

For various commercial and industrial implementations, vision inspections systems offer image-based computerized inspection for your comfort. However, not modern tech, 2D and 3D machine vision technologies for computerized inspection, control engineering, top-notch management, and sorting are now frequently used, and so on.

How Digital Document Verification Eases The Customer Onboarding Process?

With the increasing online fraud, identity verification becomes the need of all businesses. Different organizations are using identity authentication services to onboard their customers but they are still facing some problems as they use manual verification solutions. 

Furnace Repair

There are many things that people want to know what to check if your furnace is not working. When the stove burns fuel, it produces hot air, and this hot air has to be released. A stove needs repairs because it has overheated and the wires inside of it have become burned.

The Best Vlogging Cameras and Gear

Are you searching for the best vlogging cameras in 2021? We have you covered. Whether you plan to publish your own YouTube camera or record professional-looking clips for Instagram viewers, we will test and rate the best video cameras in this regularly updated guide.